Verdict
A production machine. Twice the speed of the P2S, a 36 x 18 in bed that takes half sheets, an inverter chiller and built-in fire suppression. It weighs 105 kg and draws up to 1,400 W, so plan the room before the purchase.
Buy it for
- Businesses cutting full runs of signs and products
- Large pieces that don't fit a 24 in bed
- A Class 1 CO2 for a shared workshop
Skip it if
- You're a hobbyist (the P2S does most of the same work for less than half)
- Your floor or bench can't take 105 kg
- You need metal marking (add the 5 W IR module or buy a fiber)
What it can do, material by material
Based on the laser types it carries. "With coating" means only with marking spray, a coated surface or light marks. Always test on scrap first.
Wood & plywoodCuts
Clear acrylicCuts
Dark acrylicCuts
LeatherCuts
Paper & cardCuts
GlassEngraves
Slate & stoneEngraves
Anodized aluminumEngraves
Stainless steelWith coating
Brass, copper, raw aluminumNo
ABS & colored plasticsEngraves
Specifications
- Lasers
- 80 W CO2
- Motion
- Gantry (moving head)
- Working area
- 915 x 458 mm (36.0 x 18.0 in)
- Max speed
- 1,200 mm/s
- Wood cut
- 20 mm (basswood, one pass)
- Acrylic cut
- 25 mm (black acrylic, one pass)
- Max object height
- 220 mm
- Enclosure
- Fully enclosed
- Laser class
- Class 1 (Class 4 with the conveyor feeder)
- Autofocus
- Yes
- Camera
- 16 MP panoramic, close-range and two side cameras
- Weight
- 105 kg (231 lb)
- Size
- 1250 x 780 x 496 mm
- Status
- Current (2025)
Compare and alternatives
Not sure this is the right type of laser? Try the laser finder: pick your material and thickness and it lists the machines that can do the job.
Sources
Specs and prices checked November 4, 2026. Prices change often; confirm before you buy.
FAQ
What lasers does the xTool P3 have?
80 W CO2.
How big is the xTool P3 working area?
915 x 458 mm (36.0 x 18.0 in).
How thick can the xTool P3 cut?
Up to 20 mm of wood (basswood, one pass) and 25 mm of acrylic (black acrylic, one pass).