Verdict
The M1 combined a 10 W diode with a drag blade for vinyl and paper. It still works well, but the M1 Ultra replaced it with more modes and better positioning. Buy one only at a clear discount.
Buy it for
- Crafters who cut vinyl and engrave wood
- A discounted or refurbished deal
Skip it if
- You're paying close to M1 Ultra money
- You need more than 10 W
What it can do, material by material
Based on the laser types it carries. "With coating" means only with marking spray, a coated surface or light marks. Always test on scrap first.
Wood & plywoodCuts
Clear acrylicNo
Dark acrylicCuts
LeatherCuts
Paper & cardCuts
GlassWith coating
Slate & stoneEngraves
Anodized aluminumEngraves
Stainless steelWith coating
Brass, copper, raw aluminumNo
ABS & colored plasticsWith coating
Specifications
- Lasers
- 10 W blue diode
- Motion
- Gantry (moving head)
- Working area
- 385 x 300 mm (15.2 x 11.8 in)
- Wood cut
- 8 mm (10 W, per pass)
- Acrylic cut
- 3 mm (dark acrylic, 10 W)
- Enclosure
- Fully enclosed
- Camera
- Built-in camera
- Status
- Being replaced by the M1 Ultra
Compare and alternatives
Not sure this is the right type of laser? Try the laser finder: pick your material and thickness and it lists the machines that can do the job.
Sources
Specs and prices checked November 4, 2026. Prices change often; confirm before you buy.
FAQ
What lasers does the xTool M1 have?
10 W blue diode.
How big is the xTool M1 working area?
385 x 300 mm (15.2 x 11.8 in).
How thick can the xTool M1 cut?
Up to 8 mm of wood (10 W, per pass) and 3 mm of acrylic (dark acrylic, 10 W).