Verdict
The Falcon2 frame inside a transparent Class 1 enclosure. It has a larger bed than the xTool S1 and cuts 20 mm basswood in one pass, but focusing is manual and the camera needs calibration. Check the newer Pro S, which adds one-click autofocus.
Buy it for
- Square-ish projects up to 400 x 415 mm
- Thick wood cutting in an enclosed machine
- Buyers who use LightBurn
Skip it if
- You want autofocus (look at the Pro S or xTool S1)
- You cut clear acrylic
- You need metal marking
What it can do, material by material
Based on the laser types it carries. "With coating" means only with marking spray, a coated surface or light marks. Always test on scrap first.
Wood & plywoodCuts
Clear acrylicNo
Dark acrylicCuts
LeatherCuts
Paper & cardCuts
GlassWith coating
Slate & stoneEngraves
Anodized aluminumEngraves
Stainless steelWith coating
Brass, copper, raw aluminumNo
ABS & colored plasticsWith coating
Specifications
- Lasers
- 40 W blue diode
- Motion
- Gantry (moving head)
- Working area
- 400 x 415 mm (15.7 x 16.3 in)
- Max speed
- 417 mm/s
- Wood cut
- 20 mm (basswood, one pass)
- Enclosure
- Fully enclosed
- Laser class
- Class 1
- Autofocus
- No (manual)
- Camera
- Built-in camera
- Weight
- 18.56 kg (41 lb)
- Size
- 664 x 570 x 328 mm
- Status
- Current (22 W, 40 W and 60 W versions)
Compare and alternatives
Not sure this is the right type of laser? Try the laser finder: pick your material and thickness and it lists the machines that can do the job.
Sources
Specs and prices checked November 4, 2026. Prices change often; confirm before you buy.
FAQ
What lasers does the Creality Falcon2 Pro 40W have?
40 W blue diode.
How big is the Creality Falcon2 Pro 40W working area?
400 x 415 mm (15.7 x 16.3 in).
How thick can the Creality Falcon2 Pro 40W cut?
Up to 20 mm of wood (basswood, one pass).