Verdict
Twice the power of the A1 plus autofocus and Wi-Fi. The optional 2 W infrared module adds metal and plastic marking, which closes much of the gap with xTool's dual-laser machines. The bed is smaller than the A1's.
Buy it for
- Home businesses engraving wood, leather and coated tumblers
- Adding metal marking later with the IR module
- An enclosed machine under $1,100
Skip it if
- You need a larger bed than 358 x 268 mm
- You cut clear acrylic
- You want 40 W cutting power
What it can do, material by material
Based on the laser types it carries. "With coating" means only with marking spray, a coated surface or light marks. Always test on scrap first.
Wood & plywoodCuts
Clear acrylicNo
Dark acrylicCuts
LeatherCuts
Paper & cardCuts
GlassWith coating
Slate & stoneEngraves
Anodized aluminumEngraves
Stainless steelWith IR option
Brass, copper, raw aluminumWith IR option
ABS & colored plasticsWith IR option
Specifications
- Lasers
- 20 W blue diode (optional 2 W infrared)
- Motion
- Gantry (moving head)
- Working area
- 358 x 268 mm (14.1 x 10.6 in)
- Max speed
- 600 mm/s
- Enclosure
- Fully enclosed
- Laser class
- Class 1
- Autofocus
- Yes
- Camera
- Built-in camera
- Size
- 567 x 468 x 211 mm
- Status
- Current
Compare and alternatives
Not sure this is the right type of laser? Try the laser finder: pick your material and thickness and it lists the machines that can do the job.
Sources
Specs and prices checked November 4, 2026. Prices change often; confirm before you buy.
FAQ
What lasers does the Creality Falcon A1 Pro have?
20 W blue diode (optional 2 W infrared).
How big is the Creality Falcon A1 Pro working area?
358 x 268 mm (14.1 x 10.6 in).